| SPECIFICATIONS | FHC-120EA |
|---|---|
| Spindle Motor (kw(hp)) | 5 HP(3.75kw) x 2 ps(Standard) 2 HP(1.5kw) ~ 5HP(3.75kw) (Optional) |
| Spindle Speed (rpm) | 300 ~ 1500rpm (Standard) 800 ~ 2500rpm (Optional) |
| Frequency Converter (kw) | 5HP~15HP (3.75kw~11kw) |
| Sever-Motor Feeding (kw(hp)) | 1.5kw (Optional) |
| Air Pressure (mpa) | 6~8 kg/cm², 120ml/min , 0.6~0.8mpa |
| Applicable Materals | Various pipes including steel, iron, stainless steel, aluminum, bronze |
| Pipe and Bar O.D. Outter I.D. Inner Angle and End Face(mm) |
A type workpiece Ø12~Ø60, B type workpiece Ø50~Ø90, C type workpiece Ø80~Ø120, thickness T0.8~5mm According to length of A、B or C type workpiece |
| Workpiece Length | A type workpiece L25~300mm B type workpiece L25~250mm C type workpiece L25~200mm According to outside of A、B or C type workpiece |
| Cutterhead (mm) | O.D Ø130 Ø12~Ø52,(MAX Ø60) (Standard) O.D Ø170 Ø50~Ø120, (Optional) |
| Machine Dimensions (LxWxH) (mm) | 2330x1630x2130 |
| Packing Dimensions (LxWxH) (mm) | 2400x1700x2200 |
| N.W. (kg) | 2200 kg |
| G.W. (kg) | 2500 kg |
| Model | THC-B90NC |
|---|---|
| Cutting Capacity | |
| Round Solid Bar (mm) | 15~90 |
| Square Solid Bar (mm) | 15~80 |
| Rectangle (mm) | 15~80 |
| Round Pipe (mm) | 15~90 |
| Square Pipe (mm) | 15~80 |
| Maximum Length of Head Cut (mm) | 10 ~ 60 |
| Tail Length Shorten Facility (mm) | 20~25 (oprional) |
| Waste Material Length at Tail End (mm) | 55~(55 +π Cutting length) |
| Feeding Length (mm) | 5~600 Continuous cycles |
| Manually Stack Line-up Loader Capacity (kg) | 3000 |
| Material Length (mm) | 2000 ~ 6000 |
| Material Loading Width (mm) | 950 |
| Machine Specifications | THC-B90NC |
|---|---|
| TCT Carbide Sawblade | Ø285 × 2.0~Ø330 × 2.25 |
| Pin Holes + Bore (mm) | 4 × Ø11 × PCD63 × Ø32 |
| TIP Aluminum Carbide Sawblade (mm) | -- |
| Pin Holes + Bore (mm) | -- |
| HSS Sawblade (mm) | Ø285~Ø330／t2.0~2.5 |
| Spindle Motor (kw) | 9 (12HP) |
| Spindle Speeds (rpm) | 50~200 |
| Frequency Inverter (kw) | 11 (12HP) |
| Hydraulic Pump Motor (kw) | 2.2 (3HP) |
| Operation Pressure (mpa) | 7mpa 70kg／cm² |
| Oil Tank Capacity (ℓ) | About 120 |
| Air Pressure (mpa) | 0.4~0.6mpa 4~6kg／cm² |
| Feed Drive | AC servo-motor (1.3kw or 1.5kw) drive ball screw for feeding |
| Sawhead Drive | AC servo-motor (1.8kw or 2.0kw) + drive ball screw for cutting (optional) |
| Tail End Gripping Drive | AC servo-motor (0.85kw or 1kw) + drive ball screw for gripping |
| Main Vise + Infeed Vise | Horizontal／Vertical hydraulic type, Infeed hydraulic vise |
| Machine Dimensions and Weight | THC-B90NC |
|---|---|
| Machine Size (mm) | 6860 x 1889 x 1530 |
| Weight (Machine + Feeder) (kg) | 2800 |
FHC-120EA
1.Standard cutterhead for left and right x 2 sets
2. Circular clamp two pieces in one set.
THC-B90NC
1.Sawblade Gap Compensation Device
2.Tungsteen Pad for Sawblade Run-out
3.Wheel Brush
4.Scraper Type Chip Conveyor
5.Mist Cooling Device
6.Cutting Fluid Cooling Device
7.Angular Steel Slicing Device
8.Work Light
FHC-120EA
1.Custom cutterhead
2.Custom circular clamp
3.Vibration or ATF. Automatic carriage feeder
4.End Knurling Device
5.Mist cooling device
THC-B90NC
1.TCT Carbide Sawblade
2.HSS Sawblade
3.Oil Mist Collector
4.Cutting Fluid
5.Automatic Roller Out Feeding Device
6.Manual Storage Loader
7.Automatic Feeding Equipment
8.Automatic Magazine Loader
9.Automatic Locating Equipment